Modular DIN-Rail Robot Controller
This modular robot control allows to operate stepper motors and digital Input / Outputs. In combination with the CPRog software gantry or robot kinematics can be driven. Due to the DIN rail form factor the modules allow a very easy service.
The control and programming environment CPRog for Windows 7/10 generates the commands for the joints and forwards them with a USB-to-CAN adapter to the electronic modules. CPRog is based on a 3D user interface that allows an easy start into robot programming. The robot can be moved in reality, but also in simulation to allow testing. Robot programs can contain e.g. Joint, Linear, DigitalOut, Loop or If-Then-Else commands. Further components, e.g. computer vision systems, can be connected using plugins. A 24V power supply and a Windows PC are required for operation.
- Smooth motion with 1/256 microstepping
- DIN-rail modules with bus connection
- Source code and ROS packages are provided
The control is supplied without cables and assembly.
Highlights
ดาวน์โหลดฟรี:
ดาวน์โหลดซอฟต์แวร์และติดตั้งบนคอมพิวเตอร์ของคุณ เพื่อดูว่าใช้งานได้หรือไม่
ดาวน์โหลดซอฟต์แวร์ตอนนี้ฟรี คุณสามารถทำความคุ้นเคยกับอินเทอร์เฟซผู้ใช้และฟังก์ชั่นต่างๆ ก่อนตัดสิ้นใจซื้อส่วนประกอบต่างๆ เข้าใจทุกแง่มุมของหุ่นยนต์ด้วย Digital Twin (ความต้องการของระบบ: พีซี Windows 10, พอร์ต USB 2.0 ฟรี, พอร์ต Ethernet, พื้นที่เก็บข้อมูลฟรี 500 MB)
อุปกรณ์เสริมพร้อมหน้าจอสัมผัส
เลือกการตั้งค่าที่เหมาะสมสำหรับคุณ
คุณสามารถควบคุมหุ่นยนต์ได้ทั้งจากคอมพิวเตอร์ Windows 10 และรีโมทคอนโทรลแบบพกพาที่มีหน้าจอสัมผัส บนเครื่องคอมพิวเตอร์ คุณสามารถตั้งโปรแกรมหุ่นยนต์ได้ง่ายๆ ผ่านทางโปรแกรมที่มีไอคอน รีโมตคอนโทรล ช่วยให้คุณบังคับหุ่นยนต์ด้วยจอยสติ๊กและเริ่มโปรแกรมต่าง ๆ ผ่านหน้าจอสัมผัส นอกจากนี้ คุณยังสามารถใช้เกมแพดที่ต่อกับเครื่องคอมพิวเตอร์ Windows 10 เพื่อควบคุมหุ่นยนต์แทนรีโมทได้อีกด้วย เมื่อตั้งโปรแกรมหุ่นยนต์เสร็จบนเครื่องคอมพิวเตอร์แล้ว คุณสามารถนำไปใช้งานได้เองโดยไม่ต้องต่อกับคอมพิวเตอร์อีกต่อไป (ใช้รีโมทคอนโทรลสั่งงานได้เลย)